Photos of this item are available on request — ask via the inquiry form.
Seal Kit hydraulic cylinder 250/160-1450
- Seller
- Verified company · Holm, Germany
- Availability
- Confirmed 12 Sep 2026
- Responds
- Within 24 hours, by a person
- Ships
- EXW · parcel or forwarder · pickup possible
About this part
Surplus stock from a warehouse clearance in Holm, Germany. Original listing (German): Seal Kit Hydraulikzylinder 250/160-1450
Possible match · from the OceanSphere register
Model page →Unconfirmed automatic match. The system picked this model from the listing title and manufacturer; nobody has checked it. It may describe a different model or product family. Treat the figures below as a lead, not as data for this part, and ask the seller before you order.
- Equipment
- Plimsoll Windlass
- Model
- PH-160 Hydraulic Windlass
- Manufacturer
- Plimsoll
- Type
- Windlass
- Category
- Anchor & Mooring Equipment
- Capacity
- 160 kN
- Medium
- Anchor Chain / Mooring Lines
- Swl kn
- 160
- Chain diameter mm
- 56
- Speed m min
- 9
- Drive
- hydraulic
- Vessel types
- Super‑yacht, Large sailing yacht, Motor yacht (30 m+), Expedition yacht
- Typical failure
- Pump wear ring erosion · Solenoid valve sticking · Gypsy pocket wear
- Spare parts
- Plimsoll: Keep spare brake linings on board. Lead time: 3-6 weeks.
About this model
The Plimsoll PH‑160 is a hydraulic windlass designed for yachts and large pleasure boats, delivering up to 160 kN pull‑load with a 56 mm chain at 9 m/min. The supplied category identifies the equipment as Boat DNV-Approved (Review), and it is normally installed at the location appropriate to its actual installed function, which is not established by the supplied category alone. In that listed role, its primary purpose is to perform the function documented for the actual manufacturer model once its identity and marine approval status have been verified. Because the source explicitly places this item in a quarantine/review category, it would be unsafe to infer a specific machinery type, performance rating or approval from the category alone. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. The source metadata also states capacity: 160 kN. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.